Rachnera - 3D Print File
Free 3d printable figurine.
You will get:
- 4 Chitubox projects with pre-supported pieces
- 15 STL files of all pieces
The print was originally made on an Elegoo Mars and is 150mm tall (6 in). If you have a bigger printer you can reorganise the pieces to fit all in one batch.
IMPORTANT: I strongly advise to not downscale the pieces as they are already to the limit for some small and thin part (fingers and apron). If you can, consider upscale it. The spider body has 2 holes to drain the resin, but they are small and can make the resin removal process quite tedious. I advise you to add a 3rd hole and the top of the body near the web to facilitate the air flow in. In the download file you will also get an image that will help you assembly the legs as it might be a bit hard to figure out which leg attaches where without any guide.
Only settings I tweaked were: 9 second exposure time, 45 second bottom exposure time. I used Elegoo gray water washable resin. You may want to adjust your settings to what better suits your printer, resin and environment.
You are allowed to re-sell the physical prints, but you are not allowed to re-sell or share in any way the digital files.
Presentation seems superfluous. Rachnera Arachnera is an arachne type monster girl from the manga and anime "Daily Life with Monster Girl" (Monster Musume no Iru Nichijou). Give her home on your desk and start living your life with one of the best monster girl.
Follow me to get notified about new figurine and discounts.
https://succubaecollectibles.gumroad.com/follow
Follow me on twitter to see work in progress of the next figurines.
Print files and STLs